IPC::ShareLite - Lightweight interface to shared memory
This document describes IPC::ShareLite version 0.17
use IPC::ShareLite;
my $share = IPC::ShareLite->new(
-key => 1971,
-create => 'yes',
-destroy => 'no'
) or die $!;
$share->store( "This is stored in shared memory" );
my $str = $share->fetch;
IPC::ShareLite provides a simple interface to shared memory, allowing
data to be efficiently communicated between processes. Your operating
system must support SysV IPC (shared memory and semaphores) in order to
use this module.
IPC::ShareLite provides an abstraction of the shared memory and
semaphore facilities of SysV IPC, allowing the storage of arbitrarily
large data; the module automatically acquires and removes shared memory
segments as needed. Storage and retrieval of data is atomic, and locking
functions are provided for higher-level synchronization.
In many respects, this module is similar to IPC::Shareable. However,
IPC::ShareLite does not provide a tied interface, does not
(automatically) allow the storage of variables, and is written in C
for additional speed.
Construct an IPC::ShareLite object by calling its constructor:
my $share = IPC::ShareLite->new(
-key => 1971,
-create => 'yes',
-destroy => 'no'
) or die $!;
Once an instance has been created, data can be written to shared memory
by calling the store() method:
$share->store("This is going in shared memory");
Retrieve the data by calling the fetch() method:
my $str = $share->fetch();
The store() and fetch() methods are atomic; any processes attempting
to read or write to the memory are blocked until these calls finish.
However, in certain situations, you'll want to perform multiple
operations atomically. Advisory locking methods are available for
this purpose.
An exclusive lock is obtained by calling the lock() method:
$share->lock();
Happily, the lock() method also accepts all of the flags recognized
by the flock() system call. So, for example, you can obtain a
shared lock like this:
$share->lock( LOCK_SH );
Or, you can make either type of lock non-blocking:
$share->lock( LOCK_EX|LOCK_NB );
Release the lock by calling the unlock() method:
$share->unlock;
This is the constructor for IPC::ShareLite. It accepts both
the positional and named parameter calling styles.
$key is an integer value used to associate data between processes.
All processes wishing to communicate should use the same $key value.
$key may also be specified as a four character string, in which case
it will be converted to an integer value automatically. If $key
is undefined, the shared memory will not be accessible from other
processes.
$create specifies whether the shared memory segment should be
created if it does not already exist. Acceptable values are
1, 'yes', 0, or 'no'.
$destroy indicates whether the shared memory segments and semaphores
should be removed from the system once the object is destroyed.
Acceptable values are 1, 'yes', 0, or 'no'.
If $exclusive is true, instantiation will fail if the shared memory
segment already exists. Acceptable values are 1, 'yes', 0, or 'no'.
$mode specifies the permissions for the shared memory and semaphores.
The default value is 0666.
$flags specifies the exact shared memory and semaphore flags to
use. The constants IPC_CREAT, IPC_EXCL, and IPC_PRIVATE are available
for import.
$size specifies the shared memory segment size, in bytes. The default
size is 65,536 bytes, which is fairly portable. Linux, as an example,
supports segment sizes of 4 megabytes.
The constructor croaks on error.
This method stores $scalar into shared memory. $scalar may be
arbitrarily long. Shared memory segments are acquired and
released automatically as the data length changes.
The only limits on the amount of data are the system-wide
limits on shared memory pages (SHMALL) and segments (SHMMNI)
as compiled into the kernel.
The method raises an exception on error.
Note that unlike the IPC::Shareable manpage, this module does not automatically
allow references to be stored. Serializing all data is expensive, and is
not always necessary. If you need to store a reference, you should employ
the Storable module yourself. For example:
use Storable qw( freeze thaw );
...
$hash = { red => 1, white => 1, blue => 1 };
$share->store( freeze( $hash ) );
...
$hash = thaw( $share->fetch );
This method returns the data that was previously stored in
shared memory. The empty string is returned if no data was
previously stored.
The method raises an exception on error.
Obtains a lock on the shared memory. $type specifies the type
of lock to acquire. If $type is not specified, an exclusive
read/write lock is obtained. Acceptable values for $type are
the same as for the flock() system call. The method returns
true on success, and undef on error. For non-blocking calls
(see below), the method returns 0 if it would have blocked.
Obtain an exclusive lock like this:
$share->lock( LOCK_EX ); # same as default
Only one process can hold an exclusive lock on the shared memory at
a given time.
Obtain a shared lock this this:
$share->lock( LOCK_SH );
Multiple processes can hold a shared lock at a given time. If a process
attempts to obtain an exclusive lock while one or more processes hold
shared locks, it will be blocked until they have all finished.
Either of the locks may be specified as non-blocking:
$share->lock( LOCK_EX|LOCK_NB );
$share->lock( LOCK_SH|LOCK_NB );
A non-blocking lock request will return 0 if it would have had to
wait to obtain the lock.
Note that these locks are advisory (just like flock), meaning that
all cooperating processes must coordinate their accesses to shared memory
using these calls in order for locking to work. See the flock() call for
details.
Locks are inherited through forks, which means that two processes actually
can possess an exclusive lock at the same time. Don't do that.
The constants LOCK_EX, LOCK_SH, LOCK_NB, and LOCK_UN are available
for import:
use IPC::ShareLite qw( :lock );
Or, just use the flock constants available in the Fcntl module.
Releases any locks. This is actually equivalent to:
$share->lock( LOCK_UN );
The method returns true on success and undef on error.
Each share has a version number that incrementents monotonically for
each write to the share. When the share is initally created its version
number will be 1.
my $num_writes = $share->version;
Get a share's key.
my $key = $share->key;
Get a share's create flag.
Get a share's exclusive flag.
Get a share's flag.
Get a share's mode.
Get a share's segment size.
Get the number of segments in a share. The memory usage of a share can
be approximated like this:
my $usage = $share->size * $share->num_segments;
$usage will be the memory usage rounded up to the next segment
boundary.
Get or set the share's destroy flag.
For a rough idea of the performance you can expect, here are some
benchmarks. The tests were performed using the Benchmark module
on a Cyrix PR166+ running RedHat Linux 5.2 with the 2.0.36 kernel,
perl 5.005_02 using perl's malloc, and the default shared memory
segment size. Each test was run 5000 times.
DATA SIZE (bytes) TIME (seconds) Op/Sec
store 16384 2 2500
fetch 16384 2 2500
store 32768 3 1666
fetch 32768 3 1666
store 65536 6 833
fetch 65536 5 1000
store 131072 12 416
fetch 131072 12 416
store 262144 28 178
fetch 262144 27 185
store 524288 63 79
fetch 524288 61 81
Most of the time appears to be due to memory copying.
Suggestions for speed improvements are welcome.
The module should compile on any system with SysV IPC and
an ANSI C compiler, and should compile cleanly with the
-pedantic and -Wall flags.
The module has been tested under Solaris, FreeBSD, and Linux.
Testing on other platforms is needed.
If you encounter a compilation error due to the definition
of the semun union, edit the top of sharestuff.c and undefine
the semun definition. And then please tell me about it.
I've heard rumors that a SysV IPC interface has been
constructed for Win32 systems. Support for it may be
added to this module.
IPC::ShareLite does not understand the shared memory
data format used by IPC::Shareable.
Copyright 1998-2002, Maurice Aubrey <maurice@hevanet.com>.
All rights reserved.
This release by Andy Armstrong <andy@hexten.net>.
This module is free software; you may redistribute it and/or
modify it under the same terms as Perl itself.
Special thanks to Benjamin Sugars for developing the
IPC::Shareable module.
See the Changes file for other contributors.
the IPC::Shareable manpage, ipc(2), shmget(2), semget(2), perl.
|