Set::IntSpan - Manages sets of integers
# BEGIN { $Set::IntSpan::integer = 1 }
use Set::IntSpan qw(grep_set map_set grep_spans map_spans);
# $Set::IntSpan::Empty_String = '-'; # or '';
$set = new Set::IntSpan $set_spec;
$set = new Set::IntSpan @set_specs;
$valid = valid Set::IntSpan $run_list;
$set = copy $set $set_spec;
$run_list = run_list $set;
@elements = elements $set;
@sets = sets $set;
@spans = spans $set;
$u_set = union $set $set_spec;
$i_set = intersect $set $set_spec;
$x_set = xor $set $set_spec;
$d_set = diff $set $set_spec;
$c_set = complement $set;
$set->U($set_spec); # Union
$set->I($set_spec); # Intersect
$set->X($set_spec); # Xor
$set->D($set_spec); # Diff
$set->C; # Complement
equal $set $set_spec
equivalent $set $set_spec
superset $set $set_spec
subset $set $set_spec
$n = cardinality $set;
$n = size $set;
empty $set
finite $set
neg_inf $set
pos_inf $set
infinite $set
universal $set
member $set $n;
insert $set $n;
remove $set $n;
$min = min $set;
$max = max $set;
$holes = holes $set;
$cover = cover $set;
$inset = inset $set $n;
$smaller = trim $set $n;
$bigger = pad $set $n;
$subset = grep_set { ... } $set;
$mapset = map_set { ... } $set;
$subset = grep_spans { ... } $set;
$mapset = map_spans { ... } $set;
for ($element=$set->first; defined $element; $element=$set->next) { ... }
for ($element=$set->last ; defined $element; $element=$set->prev) { ... }
$element = $set->start($n);
$element = $set->current;
$n = $set->at($i);
$slice = $set->slice($from, $to);
$i = $set->ord($n);
$i = $set->span_ord($n);
$u_set = $set + $set_spec; # union
$i_set = $set * $set_spec; # intersect
$x_set = $set ^ $set_spec; # xor
$d_set = $set - $set_spec; # diff
$c_set = ~$set; # complement
$set += $set_spec; # union
$set *= $set_spec; # intersect
$set ^= $set_spec; # xor
$set -= $set_spec; # diff
$set eq $set_spec # equal
$set ne $set_spec # not equal
$set le $set_spec # subset
$set lt $set_spec # proper subset
$set ge $set_spec # superset
$set gt $set_spec # proper superset
# compare sets by cardinality
$set1 == $set2
$set1 != $set2
$set1 <= $set2
$set1 < $set2
$set1 >= $set2
$set1 > $set2
$set1 <=> $set2
# compare cardinality of set to an integer
$set1 == $n
$set1 != $n
$set1 <= $n
$set1 < $n
$set1 >= $n
$set1 > $n
$set1 <=> $n
@sorted = sort @sets; # sort sets by cardinality
if ($set) { ... } # true if $set is not empty
print "$set\n"; # stringizes to the run list
Nothing
grep_set, map_set, grep_spans, map_spans
Set::IntSpan manages sets of integers.
It is optimized for sets that have long runs of consecutive integers.
These arise, for example, in .newsrc files, which maintain lists of articles:
alt.foo: 1-21,28,31
alt.bar: 1-14192,14194,14196-14221
A run of consecutive integers is also called a span.
Sets are stored internally in a run-length coded form.
This provides for both compact storage and efficient computation.
In particular,
set operations can be performed directly on the encoded representation.
Set::IntSpan is designed to manage finite sets.
However, it can also represent some simple infinite sets, such as { x | x>n }.
This allows operations involving complements to be carried out consistently,
without having to worry about the actual value of INT_MAX on your machine.
A span is a run of consecutive integers.
A span may be represented by an array reference,
in any of 5 forms:
Span Set
[ $n, $n ] { n }
[ $a, $b ] { x | a<=x && x<=b}
Span Set
[ undef, $b ] { x | x<=b }
[ $a , undef ] { x | x>=a }
[ undef, undef ] The set of all integers
Some methods operate directly on spans.
Many of the methods take a set specification.
There are four kinds of set specifications.
If a set specification is omitted, then the empty set is assumed.
Thus,
$set = new Set::IntSpan;
creates a new, empty set. Similarly,
copy $set;
removes all elements from $set.
If an object reference is given, it is taken to be a Set::IntSpan object.
If a string is given, it is taken to be a run list.
A run list specifies a set using a syntax similar to that in newsrc files.
A run list is a comma-separated list of runs.
Each run specifies a set of consecutive integers.
The set is the union of all the runs.
Runs may be written in any of 5 forms.
- n
-
{ n }
- a-b
-
{ x | a<=x && x<=b }
- (-n
-
{ x | x<=n }
- n-)
-
{ x | x>=n }
- (-)
-
The set of all integers
The empty set is consistently written as '' (the null string).
It is also denoted by the special form '-' (a single dash).
The runs in a run list must be disjoint,
and must be listed in increasing order.
Valid characters in a run list are 0-9, '(', ')', '-' and ','.
White space and underscore (_) are ignored.
Other characters are not allowed.
Run list Set
"-" { }
"1" { 1 }
"1-2" { 1, 2 }
"-5--1" { -5, -4, -3, -2, -1 }
"(-)" the integers
"(--1" the negative integers
"1-3, 4, 18-21" { 1, 2, 3, 4, 18, 19, 20, 21 }
If an array reference is given,
then the elements of the array specify the elements of the set.
The array may contain
The set is the union of all the integers and spans in the array.
The integers and spans need not be disjoint.
The integers and spans may be in any order.
Array ref Set
[ ] { }
[ 1, 1 ] { 1 }
[ 1, 3, 2 ] { 1, 2, 3 }
[ 1, [ 5, 8 ], 5, [ 7, 9 ], 2 ] { 1, 2, 5, 6, 7, 8, 9 }
[ undef, undef ] the integers
[ undef, -1 ] the negative integers
Each set has a single iterator,
which is shared by all calls to
first, last, start, next, prev, and current.
At all times,
the iterator is either an element of the set,
or undef.
first, last, and start set the iterator;
next, and prev move it;
and current returns it.
Calls to these methods may be freely intermixed.
Using next and prev,
a single loop can move both forwards and backwards through a set.
Using start, a loop can iterate over portions of an infinite set.
- $set = new Set::IntSpan $set_spec
-
- $set = new Set::IntSpan @set_specs
-
Creates and returns a
Set::IntSpan object.
The initial contents of the set are given by $set_spec,
or by the union of all the @set_specs.
- $ok = valid Set::IntSpan $run_list
-
Returns true if $run_list is a valid run list.
Otherwise, returns false and leaves an error message in $@.
- $set = copy $set $set_spec
-
Copies $set_spec into $set.
The previous contents of $set are lost.
For convenience,
copy returns $set.
- $run_list = run_list $set
-
Returns a run list that represents $set.
The run list will not contain white space.
$set is not affected.
By default, the empty set is formatted as '-';
a different string may be specified in $Set::IntSpan::Empty_String.
- @elements = elements $set
-
Returns an array containing the elements of $set.
The elements will be sorted in numerical order.
In scalar context, returns an array reference.
$set is not affected.
- @sets = sets $set
-
Returns the runs in $set,
as a list of
Set::IntSpan objects.
The sets in the list are in order.
- @spans = spans $set
-
Returns the runs in $set,
as a list of the form
([$a1, $b1],
[$a2, $b2],
...
[$aN, $bN])
If a run contains only a single integer,
then the upper and lower bounds of the corresponding span will be equal.
If the set has no lower bound, then $a1 will be undef.
Similarly,
if the set has no upper bound, then $bN will be undef.
The runs in the list are in order.
For these operations,
a new Set::IntSpan object is created and returned.
The operands are not affected.
- $u_set = union $set $set_spec
-
Returns the set of integers in either $set or $set_spec.
- $i_set = intersect $set $set_spec
-
Returns the set of integers in both $set and $set_spec.
- $x_set = xor $set $set_spec
-
Returns the set of integers in $set or $set_spec,
but not both.
- $d_set = diff $set $set_spec
-
Returns the set of integers in $set but not in $set_spec.
- $c_set = complement $set
-
Returns the set of integers that are not in $set.
By popular demand, Set::IntSpan now has mutating forms of the binary set operations.
These methods alter the object on which they are called.
- $set->U($set_spec)
-
Makes $set the union of $set and $set_spec.
Returns $set.
- $set->I($set_spec)
-
Makes $set the intersection of $set and $set_spec.
Returns $set.
- $set->X($set_spec)
-
Makes $set the symmetric difference of $set and $set_spec.
Returns $set.
- $set->D($set_spec)
-
Makes $set the difference of $set and $set_spec.
Returns $set.
- $set->C
-
Converts $set to its own complement.
Returns $set.
- equal $set $set_spec
-
Returns true iff $set and $set_spec contain the same elements.
- equivalent $set $set_spec
-
Returns true iff $set and $set_spec contain the same number of elements.
All infinite sets are equivalent.
- superset $set $set_spec
-
Returns true iff $set is a superset of $set_spec.
- subset $set $set_spec
-
Returns true iff $set is a subset of $set_spec.
- $n = cardinality $set
-
- $n = size $set
-
Returns the number of elements in $set.
Returns -1 for infinite sets.
size is provided as an alias for cardinality.
- empty $set
-
Returns true iff $set is empty.
- finite $set
-
Returns true iff $set is finite.
- neg_inf $set
-
Returns true iff $set contains {x | x<n} for some n.
- pos_inf $set
-
Returns true iff $set contains {x | x>n} for some n.
- infinite $set
-
Returns true iff $set is infinite.
- universal $set
-
Returns true iff $set contains all integers.
- member $set $n
-
Returns true iff the integer $n is a member of $set.
- insert $set $n
-
Inserts the integer $n into $set.
Does nothing if $n is already a member of $set.
- remove $set $n
-
Removes the integer $n from $set.
Does nothing if $n is not a member of $set.
- min $set
-
Returns the smallest element of $set,
or
undef if there is none.
- max $set
-
Returns the largest element of $set,
or
undef if there is none.
- $holes = holes $set
-
Returns a set containing all the holes in $set,
that is, all the integers that are in-between spans of $set.
holes is always a finite set.
- $cover = cover $set
-
Returns a set consisting of a single span from $set->
min to
$set->max. This is the same as
union $set $set->holes
- $inset = inset $set $n
-
- $smaller = trim $set $n
-
- $bigger = pad $set $n
-
inset returns a set constructed by removing $n integers from
each end of each span of $set. If $n is negative, then -$n
integers are added to each end of each span.
In the first case, spans may vanish from the set;
in the second case, holes may vanish.
trim is provided as a synonym for inset.
pad $set $n is the same as inset $set -$n.
- $set->first
-
Sets the iterator for $set to the smallest element of $set.
If there is no smallest element,
sets the iterator to
undef.
Returns the iterator.
- $set->last
-
Sets the iterator for $set to the largest element of $set.
If there is no largest element,
sets the iterator to
undef.
Returns the iterator.
- $set->start($n)
-
Sets the iterator for $set to $n.
If $n is not an element of $set,
sets the iterator to
undef.
Returns the iterator.
- $set->next
-
Sets the iterator for $set to the next element of $set.
If there is no next element,
sets the iterator to
undef.
Returns the iterator.
next will return undef only once;
the next call to next will reset the iterator to
the smallest element of $set.
- $set->prev
-
Sets the iterator for $set to the previous element of $set.
If there is no previous element,
sets the iterator to
undef.
Returns the iterator.
prev will return undef only once;
the next call to prev will reset the iterator to
the largest element of $set.
- $set->current
-
Returns the iterator for $set.
The elements of a set are kept in numerical order.
These methods index into the set based on this ordering.
- $n = $set->at($i)
-
Returns the $ith element of $set,
or
undef if there is no $ith element.
Negative indices count backwards from the end of the set.
Dies if
-
$i is non-negative and $set is
neg_inf
-
$i is negative and $set is
pos_inf
- $slice = $set->slice($from, $to)
-
Returns a
Set::IntSpan object containing the elements of $set
at indices $from..$to.
Negative indices count backwards from the end of the set.
Dies if
-
$from is non-negative and $set is
neg_inf
-
$from is negative and $set is
pos_inf
- $i = $set->ord($n)
-
The inverse of
at.
Returns the index $i of the integer $n in $set,
or undef if $n if not an element of $set.
Dies if $set is neg_inf.
- $i = $set->span_ord($n)
-
Returns the index $i of the span containing the integer $n,
or
undef if $n if not an element of $set.
To recover the span containing $n, write
($set->spans)[$i]
For convenience, some operators are overloaded on Set::IntSpan objects.
One operand must be a Set::IntSpan object.
The other operand may be a Set::IntSpan object or a set specification.
$u_set = $set + $set_spec; # union
$i_set = $set * $set_spec; # intersect
$x_set = $set ^ $set_spec; # xor
$d_set = $set - $set_spec; # diff
$c_set = ~$set; # complement
$set += $set_spec; # union
$set *= $set_spec; # intersect
$set ^= $set_spec; # xor
$set -= $set_spec; # diff
The string comparison operations are overloaded to compare sets for equality and containment.
One operand must be a Set::IntSpan object.
The other operand may be a Set::IntSpan object or a set specification.
$set eq $set_spec # equal
$set ne $set_spec # not equal
$set le $set_spec # subset
$set lt $set_spec # proper subset
$set ge $set_spec # superset
$set gt $set_spec # proper superset
The numerical comparison operations are overloaded to compare sets by cardinality.
One operand must be a Set::IntSpan object.
The other operand may be a Set::IntSpan object or an integer.
$set1 == $set2
$set1 != $set2
$set1 <= $set2
$set1 < $set2
$set1 >= $set2
$set1 > $set2
$set1 <=> $set2
$set1 cmp $set2
$set1 == $n
$set1 != $n
$set1 <= $n
$set1 < $n
$set1 >= $n
$set1 > $n
$set1 <=> $n
$set1 cmp $n
N.B. The cmp operator is overloaded to compare sets by cardinality, not containment.
This is done so that
sort @sets
will sort a list of sets by cardinality.
In boolean context, a Set::IntSpan object evaluates to true if it is not empty.
A Set::IntSpan object stringizes to its run list.
- $sub_set = grep_set { ... } $set
-
Evaluates the BLOCK for each integer in $set
(locally setting
$_ to each integer)
and returns a Set::IntSpan object containing those integers
for which the BLOCK returns TRUE.
Returns undef if $set is infinite.
- $map_set = map_set { ... } $set
-
Evaluates the BLOCK for each integer in $set
(locally setting
$_ to each integer)
and returns a Set::IntSpan object containing
all the integers returned as results of all those evaluations.
Evaluates the BLOCK in list context,
so each element of $set may produce zero, one,
or more elements in the returned set.
The elements may be returned in any order,
and need not be disjoint.
Returns undef if $set is infinite.
- $sub_set = grep_spans { ... } $set
-
Evaluates the BLOCK for each span in $set
and returns a
Set::IntSpan object containing those spans
for which the BLOCK returns TRUE.
Within BLOCK, $_ is locally set to an array ref of the form
[ $lower, $upper ]
where $lower and $upper are the bounds of the span.
If the span contains only one integer, then $lower and $upper will be equal.
If the span is unbounded, then the corresponding element(s) of the array will be undef.
- $map_set = map_spans { ... } $set
-
Evaluates the BLOCK for each span in $set,
and returns a
Set::IntSpan object consisting of the union of
all the spans returned as results of all those evaluations.
Within BLOCK, $_ is locally set to an array ref of the form
[ $lower, $upper ]
as described above for grep_spans.
Each evaluation of BLOCK must return a list of spans.
Each returned list may contain zero, one, or more spans.
Spans may be returned in any order, and need not be disjoint.
However, for each bounded span, the constraint
$lower <= $upper
must hold.
- $Set::IntSpan::Empty_String
-
$Set::IntSpan::Empty_String contains the string that is returned when
run_list is called on the empty set.
$Empty_String is initially '-';
alternatively, it may be set to ''.
Other values should be avoided,
to ensure that run_list always returns a valid run list.
run_list accesses $Empty_String through a reference
stored in $set->{empty_string}.
Subclasses that wish to override the value of $Empty_String can
reassign this reference.
- $Set::IntSpan::integer
-
Up until version 1.16,
Set::IntSpan specified use integer,
because they were sets of...you know...integers.
As of 2012, users are reporting newsgroups with article numbers above
0x7fffffff, which break Set::IntSpan on 32-bit processors.
Version 1.17 removes use integer by default.
This extends the usable range of Set::IntSpan to the number of bits
in the mantissa of your floating point representation.
For IEEE 754 doubles, this is 53 bits, or around 9e15.
I benchmarked Set::IntSpan on a Pentium 4,
and it looks like use integer provides a 2% to 4% speedup,
depending on the application.
If you want use integer back, either for performance,
or because you are somehow dependent on its semantics, write
BEGIN { $Set::IntSpan::integer = 1 }
use Set::IntSpan;
Any method (except valid) will die if it is passed an invalid run list.
- Set::IntSpan::_copy_run_list: Bad syntax: $runList
-
(F) $run_list has bad syntax
- Set::IntSpan::_copy_run_list: Bad order: $runList
-
(F) $run_list has overlapping runs or runs that are out of order.
- Set::IntSpan::elements: infinite set
-
(F) An infinite set was passed to
elements.
- Set::IntSpan::at: negative infinite set
-
(F)
at was called with a non-negative index on a negative infinite set.
- Set::IntSpan::at: positive infinite set
-
(F)
at was called with a negative index on a positive infinite set.
- Set::IntSpan::slice: negative infinite set
-
(F)
slice was called with $from non-negative on a negative infinite set.
- Set::IntSpan::slice: positive infinite set
-
(F)
slice was called with $from negative on a positive infinite set.
- Set::IntSpan::ord: negative infinite set
-
(F)
ord was called on a negative infinite set.
- Out of memory!
-
(X)
elements $set can generate an ``Out of memory!''
message on sufficiently large finite sets.
Beware of forms like
union $set [1..5];
This passes an element of @set to union,
which is probably not what you want.
To force interpretation of $set and [1..5] as separate arguments,
use forms like
union $set +[1..5];
or
$set->union([1..5]);
grep_set and map_set make it easy to construct
sets for which the internal representation used by Set::IntSpan
is not small. Consider:
$billion = new Set::IntSpan '0-1_000_000_000'; # OK
$odd = grep_set { $_ & 1 } $billion; # trouble
$even = map_set { $_ * 2 } $billion; # double trouble
There are two common approaches to error handling:
exceptions and return codes.
There seems to be some religion on the topic,
so Set::IntSpan provides support for both.
To catch exceptions, protect method calls with an eval:
$run_list = <STDIN>;
eval { $set = new Set::IntSpan $run_list };
$@ and print "$@: try again\n";
To check return codes, use an appropriate method call to validate arguments:
$run_list = <STDIN>;
if (valid Set::IntSpan $run_list)
{ $set = new Set::IntSpan $run_list }
else
{ print "$@ try again\n" }
Similarly, use finite to protect calls to elements:
finite $set and @elements = elements $set;
Calling elements on a large, finite set can generate an ``Out of
memory!'' message, which cannot (easily) be trapped.
Applications that must retain control after an error can use intersect to
protect calls to elements:
@elements = elements { intersect $set "-1_000_000 - 1_000_000" };
or check the size of $set first:
finite $set and cardinality $set < 2_000_000 and @elements = elements $set;
Although Set::IntSpan can represent some infinite sets,
it does not perform infinite-precision arithmetic.
Therefore, finite elements are restricted to the range of integers on your machine.
Users report that you can construct Set::IntSpan objects on anything that
behaves like an integer. For example:
$x = new Math::BigInt ...;
$set = new Set::Intspan [ [ $x, $x+5 ] ];
I'm not documenting this as supported behavior,
because I don't have the resources to test it,
but I'll try not to break it.
If anyone finds problems with it, let me know.
The sets implemented here are based on a Macintosh data structure called
a region. See Inside Macintosh for more information.
Set::IntSpan was originally written to manage run lists for the News::Newsrc module.
Steven McDougall <swmcd@world.std.com>
Copyright (c) 1996-2013 by Steven McDougall. This module is free
software; you can redistribute it and/or modify it under the same
terms as Perl itself.
|